From sensor data to operational insights

Fabriekshal 2

Modern industrial installations generate vast amounts of data. Sensors measure pressure, temperature, position, flow, energy consumption and vibration. PLCs control machines and processes, while HMIs and SCADA systems provide operators with information about the status of an installation. Yet collecting more data does not automatically lead to better insights. Even in 2026, the familiar phrase "data rich but information poor" still reflects reality in many industrial environments.

In practice, valuable information is often scattered across different systems, screens and reports. This makes it difficult to quickly understand what is happening, where deviations occur and what actions are needed. The data is usually available, but not always accessible to everyone. Even when it is accessible, it may require conversion, integration or additional explanation before it can be used. Sometimes the information is outdated, stored in different formats, recorded with inconsistent timestamps or lacks the context needed for meaningful analysis.

The challenge, therefore, is not so much collecting data, but combining measurements, process information and system data into actionable insights for operators, maintenance teams, engineers and management.

Fragmented Information

Anyone working in a production environment or industrial installation will recognise the situation. Operators monitor their control screens. Maintenance teams look for fault histories, operating hours or error messages. Engineers analyse trends and deviations to optimise processes or determine the next maintenance interval. Management needs reports on downtime, performance and availability. They all use information from the same sources, but often through different systems.

This makes analysis unnecessarily time-consuming. A fault may be related to an unusual sensor reading, a control system setting, mechanical load, a specific operation or even ambient temperature. When this information is spread across multiple systems, identifying relationships takes time. Sometimes the cause is only discovered after production losses, downtime or additional maintenance have already occurred.

Data-driven operation is increasingly considered during the design of new installations. However, many existing machines and installations have been expanded, modified or connected to additional systems over the years. As a result, large amounts of data are collected without providing a clear overall picture.

Local Data Remains Important

Industrial digitalisation is often associated with cloud platforms, centralised management dashboards and remote data analysis. These technologies can be valuable, but they are not always suitable for every environment. Many operational technology (OT) networks are deliberately isolated. Not every installation has a continuous external connection, and availability, reliability, cybersecurity and control remain essential in critical processes.

This is why local data collection and processing continue to play an important role. Collecting and making data available close to the installation allows operators and technicians to work even without an external connection. Current measurements, trends and reports remain accessible locally. This approach is particularly relevant in environments where continuity matters and connections between OT and IT systems are carefully managed.

Local storage can also offer financial advantages. Particularly when dealing with large volumes of data, the costs of external storage, data transfer and cloud processing can increase significantly. By collecting and structuring data locally, users can decide which information remains on-site and what is shared with other systems, departments or cloud platforms. For example, technicians can retain access to high-resolution data while management receives only the relevant KPIs.

A local approach does not prevent further analysis or reporting at an organisational level. Instead, it establishes a reliable foundation by collecting, storing and structuring data where it originates.

The Data Hub as a Connecting Layer

In industrial installations, a data hub can act as a connecting layer between existing systems. Rather than replacing PLCs, HMIs or SCADA systems, it provides an additional environment where information from different sources comes together. These sources may include sensors, PLCs, variable frequency drives, energy meters, alarms, events, status information from other systems and manual input from operators.

The value lies not simply in displaying individual measurements. A temperature, pressure or current reading often means very little on its own. Information becomes useful when it is linked to time, process status, load, faults, maintenance activities or production runs. This context makes it possible to identify patterns and make better-informed decisions.

For operators, this means having current measurements and trends available in a single overview. Maintenance teams can analyse recurring faults more efficiently, while engineers can compare installation behaviour over longer periods. Management benefits from more reliable reports without having to manually collect information from different systems. In addition, structured data can provide a foundation for future AI-driven models.

From Recording Data to Understanding It

Many companies already record data, but primarily use it retrospectively. After a fault, engineers review what happened. Reports are compiled for audits or evaluations, while maintenance teams search for operating hours, fault codes or measurements. Although valuable, this remains a reactive approach.

When data is available both centrally and locally, its role changes. Information supports not only retrospective analysis but also day-to-day operations. Deviations become visible sooner, trends are easier to recognise and maintenance decisions can be supported by actual operating conditions, loads or changes in performance. Process optimisation also becomes more practical, as the effects of system adjustments can be verified directly using data.

Real-time information from different systems also creates opportunities for a more advisory role. Instead of merely showing what is happening, the available information can help indicate where attention is needed. For example, when measurements approach predefined limits, a combination of signals suggests abnormal behaviour or a process responds differently than expected.

In this way, data becomes more than a record of past events. It becomes a tool for making faster, better-informed decisions.

Requirements in Practice

An industrial data hub must integrate with existing installations. This requires connections to different systems and technologies. Independence from specific manufacturers and systems is particularly important, as installations often contain components from different suppliers and generations.

Both real-time and historical data must also be available. Operators need current information, while maintenance teams and engineers need to investigate past events. Flexible dashboards are useful because different users require different information. An operator needs to see whether a process is operating within its parameters. A maintenance technician wants to combine trends, alarms and fault information, while an engineer may focus on long-term performance and abnormal behaviour.

Reporting is another important consideration. In many organisations, preparing reports still takes considerable time. When data is recorded digitally and in a structured way, reports can be generated more quickly and consistently. This reduces reliance on manual records, limits differences in interpretation and enriches datasets with valuable information that might otherwise be difficult to obtain.

Cybersecurity and network architecture also require attention. A data hub must fit within the existing OT environment without interfering with primary control systems. It should therefore operate as an additional layer, supporting the installation without taking over essential control functions.

A Practical Example

One example of this approach is Multiped, a platform that brings together data from different sources locally for monitoring, logging, visualisation and reporting. The system was developed in practical environments where reliability, local availability and clear information are essential. These requirements are relevant not only in maritime and offshore applications, but also in industrial installations and environments where sensitive or confidential data must be protected.

Multiped can be used to make sensor data, PLC data and process information accessible in a structured way. Users can configure dashboards according to their specific roles or applications. Real-time information supports daily operations, while historical data logging helps with analysis, maintenance and reporting.

The platform does not replace existing control systems. Instead, it helps organisations combine and make better use of data already available within their installations. This can be particularly useful for machines, production lines, test facilities and technical buildings, where information is often available but lacks a connecting layer that makes it easy to understand.

A Foundation for Further Digitalisation

Predictive maintenance, digital twins and artificial intelligence are receiving increasing attention across the industrial sector. All these developments depend on the same foundation: reliable, labelled and structured data of sufficient quality and resolution. Without effective logging, context and accessibility, further analysis remains prone to errors.

This makes collecting data today equally important for tomorrow's applications. AI can only deliver meaningful value when sufficient high-quality data is available to identify patterns, interpret deviations and make predictions. Organisations that begin systematically collecting and storing installation data today are establishing the foundation for future analysis, intelligent recommendations and further automation.

A local data hub therefore represents a practical step towards industrial digitalisation. Not by replacing everything or immediately introducing an entirely new system architecture, but by collecting, combining and presenting existing data more effectively.

The value is not simply in measuring more, but in better understanding what those measurements mean. Data becomes information, information leads to knowledge, and knowledge enables informed decisions, optimisation and greater control.

The next step in industrial digitalisation often begins not with an entirely new installation, but with making better use of the data that is already available.

This article is an English translation of a Dutch-language article previously published on EngineersOnline.nl.

back to news overview

Share this article

Latest news

31 juli 2025

From sensor data to operational insights

Modern industrial installations generate large amounts of data. Sensors measure pressure, temperature, position, flow, energy consumption and vibration. PLCs control machines and processes.

31 juli 2025

From monthly reports to real-time results: Multiped provides an overview for maritime executives kopie

As a managing director, executive or owner of a maritime company, you make daily decisions with high impact. Which vessel do you deploy for which project? Can we sharpen that tender by 5%? Will we meet MRV compliance without fines? Every week you make calls on ISO, MRV compliance, ecological footprint, HSEQ and operational efficiency. 
But how often are those decisions based on gut feeling, experience, or outdated reports? “That vessel is consuming more than usual,” or “Last year we kept that project within budget.” What if you could back those decisions with solid data?

31 juli 2025

Multiped for offshore wind surveyors: from daily reporting to real-time process optimization

As a surveyor in offshore wind, you are responsible for monitoring and optimizing installation processes on board. But how many times have you thought: “If only I had spotted that deviation earlier” or “If only I could see that data side by side in real time”? Traditional systems often force you to wait for reports that only arrive the next day, or even later. In the meantime, opportunities to adjust your process and work more efficiently slip by. What if you could see exactly what’s happening right now and take action immediately?

Get started with Multiped and optimize your processes

We are happy to advise you on using Multiped to optimize your processes. Contact Technical Director Joël Smit

Multiped beeldmerk

You can reach us by phone on weekdays from 7:30 AM to 5:00 PM.

Direct to